Download XL Remote Commands
Transcript
Response: None. Example: -> GOESRRCHANNEL=1115 rs Command: GOESRRRATE? Description: Read the random transmission rate. This determines the window during which the GOES radio will transmit after detecting a random trigger. Parameters: None. Response: An ASCII text string is returned in the format of hh:mm:ss. Example: -> GOESRRRATE?5 GOES RR Rate = 00:00:30rs Command: GOESRRRATE=hh:mm:ss Description: Set the transmission rate for the random report mode of the GOES radio. Parameters: The new rate is to be entered in the format of HH:MM:SS, where H is hours, M is minutes, and S is seconds. Response: None. Example: -> GOESRRRATE=00:01:005 rs Command: GOESRRTRIGGERMODE? Description: Read the current mode of random report operation of the GOES radio. This value, along with trigger source, determines what conditions are checked when evaluating whether or not to generate a GOES random report. Parameters: None. Response: An ASCII text string is returned. The response will be “Always ”, “> Set Pt”, “< Set Pt”, or “Delta “. (See GOES section for details) Example: -> GOESRRTRIGGERMODE?5 GOES RR Trigger Mode = Always C-62 Remote Operation (Command Mode) Command sent to the XL™. Response sent to the host system. Command sent to the XL™. Response sent to the host system. Command sent to the XL™. Response sent to the host system. rs Command sent to XL™. Response from XL™. XL™ SERIES