Download Instruction Manual

Transcript
Cleaning the water supply filter
● Clean the water supply filter if the water pressure during rear or front washing seems to have
weakened.
1
Close the water shut-off valve and stop the water supply
Water shut-off valve
CAUTION
Prohibited
Do not detach the drain valve with
built-in water filter while the water
shut-off valve is still open.
● Doing so will cause water to spill.
Turn clockwise
2
Drain the water from the Washlet pipes.
button for at least 5 second on the
(1) Press the
remote control.
(This drains any remaining water from the Washlet.)
(2) Press the
STOP
button
button.
(The wand returns to its inactive position.)
Power Deodorizer
On / Off button
3
Open the cap.
Cap
Open
4
Detach the drain valve with built-in water filter
● Use a flat-blade screwdriver to loosen the drain valve
with built-in water filter and pull it out.
Attachment Hole for the drain valve with builtin water filter
Drain valve with built-in water filter
Turn anticlockwise
Water receptacle
24