Download Instruction Manual
Transcript
Cleaning the water supply filter ● Clean the water supply filter if the water pressure during rear or front washing seems to have weakened. 1 Close the water shut-off valve and stop the water supply Water shut-off valve CAUTION Prohibited Do not detach the drain valve with built-in water filter while the water shut-off valve is still open. ● Doing so will cause water to spill. Turn clockwise 2 Drain the water from the Washlet pipes. button for at least 5 second on the (1) Press the remote control. (This drains any remaining water from the Washlet.) (2) Press the STOP button button. (The wand returns to its inactive position.) Power Deodorizer On / Off button 3 Open the cap. Cap Open 4 Detach the drain valve with built-in water filter ● Use a flat-blade screwdriver to loosen the drain valve with built-in water filter and pull it out. Attachment Hole for the drain valve with builtin water filter Drain valve with built-in water filter Turn anticlockwise Water receptacle 24