Download Instruction Manual

Transcript
5
Clean the filter.
● Wash off and remove debris caught in the water filter mesh.
Tip
Filter
1
 Thoroughly remove the debris on the filter with a toothbrush or similar tool.
 Use a cotton swab or similar to remove debris from inside the attachment hole for
the drain valve with built-in water filter.
6
Reattach the drain valve with built-in
water filter.
● Insert the drain valve with built-in water filter and use a
flat-blade screwdriver to tighten it thoroughly.
Drain valve with built-in
water filter
CAUTION
Required
7
Thoroughly tighten the drain valve with
built-in water filter.
● Failure to do so could cause a water
leak.
Open the water shut-off valve.
● Open the water shut-off valve.
 Confirm that no water is leaking from the plumbing,
the main Washlet unit or the drain valve with builtin water filter.
Turn clockwise
Water shut-off valve
Check for
water leak
Turn anticlockwise
Cleaning
Cap
Open
Check for
water leak
8
Tip
Close the cap.
1
Cleaning the water supply filter
● Do not use cleanser. Wash with plain water.
● Do not break the water supply filter or detach it from the drain valve.
25