Download Version 1.9

How to Use Data Trace Recording Tool
Appendix
Explanation for Each Part of the Window
Names and Functions
Target PLC to
Trace
Sampling Area
Sampling
interval
Abort Value
Trace Data
Record file
Trace Status
Options button
Write settings
button
Start button
Read settings
button
Exit button
Item
Target PLC to
Trace
Sampling Area
Sampling interval
Interval
Per cycle
Abort Value
Type
Samples
Trace
elapsed
Unit
Description
Specify the FINS address for the PLC where data tracing will be
performed.
Only network/node address can be input.
Register addresses where bits and words are sampled.
[Edit]: Edit bit/word addresses in the Sampling Address Setting
window.
Set at least one to either of bits or words within the range on the
right.
Set the sampling conditions with the radio button.
Set the sampling interval as "fixed" and enter the interval in the
text box (unit: ms).
Trace per cycle of the ladder program.
Specify the value for exiting the data tracing.
Specify either of after getting specified number of samples or
after specified time elapsed.
Specify the value for exiting the data tracing.
Specify the time for tracing.
Limit of values
Network: 0 to 127
Node: 1 to 126
Unit: 0(fixed)
Number of bits: 0 to 31
Number of words: 0 to 6
10 to 2550
1 to 65535
1 to 65535
Specify the unit for the time above: either of second, minute, or
hour.
Trace Data Record Specify the file name for saving the sampling data: either in a A network name can not
File
relative path or in an absolute path.
be specified.
Browse
Display the File Name Setting dialog.
Options settings Set options regarding trace data saving.
243