Download User Manual - PC

Transcript
The Point or Surface with an assigned FE-Mesh Refinement are indicated using the following
marks:
and
, respectively. FE-Mesh Refinement is marked on curves using green points.
visible in the edit mode site. Contrary to other green points on the curves, they can be selected.
Figure 106. The FE-Mesh Refinement dialog window for the MeshGen2D module with four
different types of refinements (applied to a Point, a Line with a given FE-size or the number of
Points, and to a Surface).
As an example, Figure 107 shows the transport domain (700 * 650 cm) and the finite element
mesh of a problem with a furrow and a drain. The mesh was generated with a Targeted FE Size
169