Download LAC-20
Transcript
Verifying the Installation: ● Connecting the communication cable to PC and LAC20 ● Powering up the drive ● Starting EasyM otion Studio by using the Windows “S tart | Programs | EasyMotion S tudio | EasyMotion S tudio” menu command ● If the communication works properly you will see displayed on the status bar (the bottom line) of the EasM otion Studio, “Online”, the axis ID of the drive, and the firmware version. ● If the LAC20 is not detected, the “offline” message is displayed on the status bar. First, checking the serial cable and, power supply connections to the LAC20. Also checking the serial port set, it may be used by other devices. After the problems being fixed, use menu command “Communication | Refresh” to restore the connection. LAC-20 2Axis Controller/Amplifier User Manual Ver.C 15