Download User manual

Starting WebUI session
To create a WebUI session, first enter the device IP address into the
web browser’s address bar (see section Device’s IP address). The
following LOGIN window appears on the screen. Enter the required
username and password (see bottom) in the fields and then click
to continue --> Web user interface’s MAIN
PAGE appears on the screen.
The Web user interface session to MPH series video encoder is
now activated.
admin
admin
Login window with the default username and password (for administrator).
User levels and permissions
The user management supports three different user levels of which each
has specific priviledges as shown below. The individual usernames, passwords and approved user level can be changed via the WebUI and CLI.
Page
Main
Video Encoder
Maintenance
User
Management
10
User
Operator
General Access
Operation
x
x
SDP download
x
x
Log download
x
x
Start/Stop
x
x
RTSP link copy
x
x
General Access
-
x
Save
-
x
Cancel
-
x
General Access
-
x
Backup
-
x
Restore
-
x
Reboot device
-
x
Soft factory reset
-
x
Hard factory reset
-
-
Software upload
-
-
Software download
-
-
License install
-
-
General Access
x
x
Save
x
x
Cancel
x
x
Change password
x
x
Change user group
-
-
View/Edit other users
-
-
Add User
-
-
Administrator
Read and write
access to all
pages and all
settings
MPH100/400 series video encoders WebUI user manual