1
Download User manual - Electronics Datasheets
Transcript
Continued: Leveling the build plate Follow the display instruction 6/21 and 7/21 ONTINUE when inished We are going to do this again to inetune the build plate Please make sure you have a piece of paper within reach and press ONTINUE to go to the next step Make sure you turn the build plate screw to inetune this step if necessary 8/21. Follow display instruction as demonstrated in the supporting image and press ONTINUE when inished 9/21. Follow display instruction as demonstrated in the supporting image and press ONTINUE when inished 10/21. Follow display instruction as demonstrated in the supporting image and press when inished ONTINUE NOTE: If you have problems or if you need to level your build plate again you can use the UILD PL TE function under M INTEN N E through the standard menu D First use of your Ultimaker 21
