Download AN-X-AMXCAPT User Manual

AN-X-AMXCAPT Page 17
It shows the current time, the file currently being used to store the
capture data, the file size, the file being deleted (ring buffer mode only),
the number of good frames received, and the number of bad frames
received.
GoodRx is the number of frames with good status that have been
captured.
BadRx is the number of frames with bad status (CRC error, abort,
overrun, or noise) that have been captured in the current file. If you are
using the ring buffer method of capture and the stop error limit is
non-zero, BadRx is reset each time a new file opens.
The Free Space progress bar shows the amount of free space remaining
on the disk drive.
To stop the capture, click Stop.
To cancel the capture, click Cancel. This stops the capture but does not
delete any captured data files. If AutoDump was checked, the Dump
command is not executed.
Selecting Frames of Interest
Select Capture/Dump or click the Dump to Text button.
AnxAmxCapt displays the TextDump dialog.
January 2008