Download 2. Software Installation

User’s Manual
NOTE: The <Time Zone> must be set or the <Network Time
Protocol Setup> will not be accessible.
After entered your local time zone, the <Network Time Protocol Setup>
option will be accessible. Go to <Main Menu> Æ <System Setup> Æ
<Date/Time> Æ <Network Time Protocol Setup>, and the following menu
will be displayed.
Network Time Protocol Setup
1. NTP Server
time.nist.gov
2. Automatically Time Sync
1hour
3. Manually Time Sync
No
In this example, the NTP server should be set to 192.168.7.122 which is the
IP address of the local computer. After the NTP server is set, select
<Manually Time Sync> to sync the time with the local computer. The time
sync can also be updated periodically. Select <Automatically Time Sync>,
and choose a desired time interval to sync the time.
3.
Software Upgrade
The CMS will automatically connect to the FTP Server and check for upgrade
every once a week. If no upgrade is available, the CMS will continue normal
process. If upgrade is detected, please follow the steps below to proceed.
Step 1: A message box will pop up to inform you there is upgrade available.
Click <OK> to download the upgrade software and continue to the
9