Download view catalogue

2.9.5. RFID access control for flush mount
Active RFID
card holder
Access control RFID card reader
technical data
Basic functionality
LPC-2.CR1
used for identification,
door unlocking
LPC-2.CR1M
LPC-2.CA1
LPC-2.CA1M
LPC-2.CH1
LPC-2.CH1M
Signalization LEDs
Acoustic signalization
Touch buttons
for a hotel room door
unlocking and room
status signalization
RFID card holder,
presence identification
and room status setting
EM4100 - EM Marin (Manchester 64 read only) / HITAG2 (UID read only) 125kHz
MIFARE Classic 1K comply to ISO/IEC 14443-4 Type A (13,56MHz)
EM4100 - EM Marin (Manchester 64 read only) / HITAG2 (UID read only) 125kHz
MIFARE Classic 1K comply to ISO/IEC 14443-4 Type A (13,56MHz)
EM4100 - EM Marin (Manchester 64 read only) / HITAG2 (UID read only) 125kHz 
MIFARE Classic 1K comply to ISO/IEC 14443-4 Type A (13,56MHz)
OK (access granted)
FAULT (access denied)
short beep: OK
long beep: FAULT
-
DO NOT DISTURB
ROOM SERVICE
OK (access granted)
FAULT (access denied)
SOS
OCCUPIED
DO NOT DISTURB
ROOM SERVICE
short beep: OK
long beep: FAULT
DO NOT DIS. ROOM SERVICE
-
Housing color
black + user selectable frame*
flush mount*
Mounting
Communication connector
LPC-2.CH1
Available versions:
RFID reader type
LPC-2.CR1
LPC-2.CA1
RJ-12 (splitters and interconnection cables needed)
Power supply
Power consumption
Dimensions L x W x H
over communication cable
0.5 W
65 x 49 x 29 mm
*Frame is not included. Smarteh has verified following lines of
· Gewiss – Playbus, System
· Tem – Pure, Line, Soft
modular frames to be compatible with LPC-2.CxxM module:
· Vimar – Plana, Idea
· Master
· Ave
LPC-2 Programmable Controllers | 21