Download Source Four CE Mini User Manual

L o c k i n g th e r o t a ti o n i n t h e c a n o p y a n d t r a c k - m o u n t v a r i a t i o n s
Yoke lock
Step 1:
Step 2:
Step 3:
Rotate the luminaire into the desired position. Luminaire will be
prevented from rotating completely around to protect the wiring.
Insert a 1.5mm Allen wrench into the small hole on the yoke lock.
Turn wrench to tighten down the yoke lock.
F oc u s i n g t h e b e a m
Step 1:
Step 2:
Step 3:
Loosen the beam
focus knob located
under the barrel. Do
not remove the knob.
Slide the lens tube
forward or backward to
achieve the desired
beam edge.
Once the luminaire is
focused, tighten the
beam focus knob.
Shaping the Beam
The beam can be shaped using
the four shutters or with a gobo pattern.
Beam focus knob
The Source Four Mini has four shutters:
left, right, top, and bottom. Each shutter
can be pulled out or pushed in to create
the desired beam shape.
5