Download Operation Manual

Transcript
FY operation manual
and amount of ink.
Note:normally, select four colors; select one of colors to print only by engineer.
1.
Set up print parameters
Press “More”, the following warning shows up:
Figure 10-2-6 Warning Message
Press “Yes” to confirm, a dialog box for setting up parameters pops up as below:
Figure 10-2-7 6250LQ Setting dialog box
Distance coefficient for a print head expresses as below:
Y Direction(360DPI)
:Yc=0
C is basis
Ym=496
Distance between M and C
Yy=992
Distance between Y and C
Yk=1488
Distance between K and C
X Direction (1080DPI) :in theory,four-head is at the same level on X direction. Therefore, the
- 34 -