Download MTS300 MPEG Test System Stream Creation

Using the Error Injector
5. Double-click the transport_priority selection in the Error Types window.
6. Set the cursor at the end of the error line and enter the following bold text:
transport_priority^1 1,4
This will change the one-bit transport_priority field from 0 to 1 for the first
and fourth packets in the transport stream.
7. Repeat steps 5 and 6 for the error strings in Table 3--37, adding the operators,
error values, and packet strings as indicated.
Table 3- 37: Error configuration file parameters
Error string
Operator
Error
value1
Packets2
Notes
adaptation_field_control
~
1
1,166
Changes the adaptation_field_control field for the
packets indicated.
continuity_counter
+
7
1,2
Adds 7 to value the continuity_counter for the first and
second packets.
program_clock_reference_extension
^
240
4
Changes the
program_clock_reference_extension field to 70 for
the first video packet.
sync_byte
&
9
269,4323,
4
Changes the sync_byte to 1
for the indicated packets.
PID
=
5
1
Assigns 5 to the PID of
packet 1.
1
Use a space after this value in the error configuration file
2
No spaces between these integers and commas in the error configuration file
8. Dismiss the Error Type selection window, and then select Save Config from
the File menu (or click the Save command button).
MTS300 Stream Creation Applications User Manual
3- 229