Download ESPLXD-ET Controller

Select Days to Water
Watering Days are the specific days of the week on which
irrigation is allowed to take place.
The ESPLXD-ET controller can be programmed to irrigate on different
days, dates and cycles. Regardless of which Watering Cycle you set, the
controller will only irrigate on the days or dates that you select. For
additional information see Watering Cycles later in this section.
AThe Custom screen appears. Press the Allow or Prevent buttons to
choose whether or not to allow irrigation starts to occur for that
day of the week.
NOTE: If the desired program is not selected, use the Program
bb
Select switch to change it. See Section B, Program Select Switch
for more details.
BTurn the controller dial to Tue 2 and repeat the process.
NOTE: The selections you make on the day positions of the
bb
controller dial will carry over to the Watering Cycles day settings
and vice versa.
bb
NOTE: Every day should be selected as a watering day if possible.
The ET Manager will change the Seasonal Adjust percentages
depending on the weather conditions.
1
2
Turn the controller dial to Mon 1.
gg
Repeat this process for all other days of the week in the program.
ee
Then change the Program Select switch and repeat this process to
select Days to Water for other programs as desired.
32
ESPLXD-ET Controller
ESPLXD-ET user-manual (670504-01) artwork_120716.indb 32
7/16/2012 3:48:12 PM