Download Sensor Manual

1 Before Use
Sensor head
Sensor head: 1
Laser label sheet: 1
The Laser label sheet is not
attached with LK-H008/LK-H008W.
CB-A07/CB-A2/CB-A5/CB-A10/CB-A20/CB-A30
Head-to-controller cable: 1
•
•
•
•
•
•
CB-A07: 0.7 m cable
CB-A2: 2 m cable
CB-A5: 5 m cable
CB-A10: 10 m cable
CB-A20: 20 m cable
CB-A30: 30 m cable
CB-A5E/CB-A10E
Head-to-controller extension cable: 1
• CB-A5E: 5 m extension cable
• CB-A10E: 10 m extension cable
NOTE
• For each sensor head connection, use only one head-to-controller extension cable and limit the
total length to 30 m at maximum.
• You cannot connect the CB-AE to the CB-A30.
• You cannot connect two CB-A10E cables to the CB-A10.
The package contents have been carefully inspected; however, if any component is
defective or damaged, contact your nearest KEYENCE office (address listed at the end of
this manual).
For the optional products, refer to "List of Optional Accessories" (page A-7).
1-5
1