Download Sensor Manual

4 I/O terminals
Binary output
 BINARY (Normal mode)
OUT1
Measured value
OUT1
BINARY
OUT1
T6/2
STROBE output
OUT1
OUT1
OUT1
OUT1
T6/2
ON
OFF
• When the sampling cycle (T6) is 20 μs or less, the STROBE output’s T6 is fixed to 20 μs.
4
 BINARY (Measurement mode with Trigger 1 selected)
TIMING (TIMING 1)
ON
OFF
T1 min. T1 min.
OUT1
Measured value
BINARY
T2 max.
0.2 ms
STROBE output
T2 max.
Less than T3
0.2 ms
T3
ON
OFF
 BINARY (Measurement mode other than the sample hold with Trigger 2 selected)
TIMING (TIMING1)
ON
OFF
T1 min. T1 min. T2 max.
T2 max.
OUT1
Measured value
BINARY
Max. T2 + T4 + Sampling period
0.2 ms
Less than T3
STROBE output
Max. T2 + T4 + Sampling period
0.2 ms
T3
ON
OFF
4-19