Download Here - TME

ClockComm
3.3.3.
RS485 Communications method:
To add a new time clock using the RS485 Communication method, do the
following:
1. From the Comm Type drop-down list (see Figure 3-2), select RS485.
2. In the Description field, type a short description or name of the added
time clock
3. Select the Clock Type (for example, InTagral Plus).
4. Verify that the Com Port field is set to 1 or 2 (depending on the port to
which you have connected the RS485 cable).
5. In the Clock ID field enter a four character Alphanumeric value of your
choice.
6. In the Clock Serial Number field, enter the unique time clock Serial
Number (by manufacture).
7. Click the
button.
The Add Record window closes, and the new time clock record appears on
the clock list in the Connection & Configuration window.
3.3.4.
LAN (TCP/IP) Communications method:
To add a new time clock using the LAN Communication method, do the
following:
1. From the Comm Type drop-down list (see Figure 3-2), select LAN.
2. In the Description field, type a short description or name of the added
time clock
3. Select the Clock Type (for example, InTagral Plus).
4. In the Clock ID field enter a four character Alphanumeric value of your
choice.
5
In the Clock IP Address field, enter a valid Clock IP Address. Obtain
this IP Address from your System Administrator.
6. Click the
button.
The Add Record window closes, and the new time clock record appears on
the clock list in the Connection & Configuration window.
NOTE:
One Host PC can communicate with a number of InTagral™ clocks using different communication modes.
Micronet Documents
Page 3-7