Download User Manual - kimo instruments uk

1. Introduction
1.1. Analyser description
KIGAZ 200 instrument is a gas analyser with two interchangeable sensors (O2 and CO-H2), with additional option of
adding 1 sensor (NO or CH4) or is a gas analyser with three interchangeable sensors (O2, CO-H2 and NO) with additional
possibility of a 4th sensor (CH4).
Its main features are the following :
• Autozero in the duct
• Protection of CO sensor by solenoid valve
• Led on handle for lightning of dark areas
• External water trap
• Grey level 3.5'' screen
• 2 thermocouple connections
• 2 Go of memory
The gas analyser is supplied in a transport case in ABS or metallic (optional) with a magnetic protective cover, a differential
pressure kit, an interchangeable flue gas probe of 300 mm length with integrated draft and LED, a Li-ion battery and its
charger, Ligaz software, a USB cable and a calibration certificate. A paper roll for the printer and a filter are also provided.
This gas analyser is designed to control parameters of flue gas in exhaust duct of heating units. It can
not be used in a permanently way and/or used as an alarm system.
1.1.1. Overview of the analyser
Integrated printer
Grey scale 3,5'' display
Overmoulded handle
LED button
Backlighted keypad
LED
External water trap
Fixing cone
Single connector for
flue gas probe
(TcK+gas) and draft
Flue gas probe
Introduction
7