Download UTAS user manual - LKC Technologies, Inc.

UTAS Software
Use the Ctrl or Shift key to select multiple waveforms to export. The default name of the export
file is Export.CVS. If needed, the name can be changed by typing the desired new name in the
Export File Name window.
Once Continue is clicked, the export file will be created and saved under C:\EMWIN\Export.
Note: if multi-data (created a protocol where in one step the software will automatically collect
more than 1 waveform and save all individual waveforms) are recorded, all the waveforms will
be exported back to back; however, only the cursors on the first waveform will be exported.
10.10.3 Importing Data From Your DOS LKC System
Previous users of any version of EM for DOS software may also convert older data to the
EMWin format. This allows the user to exploit the powerful report making features that are not
available in previous versions of LKC software.
In the "EMWin" folder of the hard drive of the computer (c: drive), there is a program named
"CONVERT.EXE". Double-click this icon with the left-mouse button to open this conversion
utility. Data from all versions of EM for DOS are named "WAVEFORM.xxx", where xxx is a
number from 001 to 999. Select the disk drive that contains these waveform files. Typically,
these files would be copied from an older EPIC or UTAS system to a floppy or zip disk (if files
are stored on floppy disks, please contact LKC to purchase a floppy disk to USB adapter). Now,
select the appropriate directory and sub-directory to copy them to.
Before converting the data, you must first determine the target database for the waveforms. The
default option for the "Convert" program is the currently selected database for EMWin, which is
displayed at the bottom right of the menu. Waves will be added to the end of this database in
chronological order. From this menu, a different database can be selected or a new one created
for this data.
For example, to create a new blank database for all EM for DOS data:
1.
2.
3.
4.
Click the "Create New Database"
In the text box, type "EMDOSDATA" (or any other name) and click "OK."
Now click the "Select Database" button, and choose "EMDOSDATA" from the list.
Click "Continue".
At this point, all converted data will be added to the new EMDOSDATA database.
On the right side of the Conversion utility screen, multiple waveforms can be selected using the
<Shift> and <Ctrl> keys. Holding down the <Shift> key allows a range of waveforms to be
selected at once. Holding the down the <Ctrl> key allows individual waves to be selected. Once
all desired waveforms are selected, click the "Go" button. After it has completed (this may take
a few seconds), a message will appear indicating a successful conversion.
Version 2.4
75