Download Model 55i - User Manual

C-Link Protocol Commands
Communications Configuration
Table B–11. Power Up Mode Values
Value
Power up Mode
0
Local/Unlocked Mode (default)
1
Remote/Locked Mode
program no
This command reports the analyzer’s model information and program
version number.
Send:
Receive:
program no
program no iSeries 55i 01.00.01.074
layout ack
This command reports the stale layout/layout change indicator (*) that is
attached to each response if the erec layout has changed since the last time
erec layout was requested, according to Table B–12. The following example
reports that the instrument is configured to do nothing.
Send:
Receive:
layout ack
layout ack 0
set layout ack value
This command disables the stale layout/layout change indicator (*) that is
attached to each response if the erec layout has changed since the last time
erec layout was requested, where value represents the function, according to
Table B–12.
Send:
Receive:
set layout ack 1
set layout ack 1 ok
Table B–12. Layout Ack Values
Value
Function
0
Do nothing (default)
1
Append “*”
tz
This command reports the “tz” timezone string for the NTP server. See
“Network Time Protocol Server” in the “Communications Settings”
section of the “Operation” chapter for more information.
Thermo Fisher Scientific
Model 55i Instruction Manual
B-47