Download "user manual"

l
l
HTTP port: Default value is 80.
Max connection: System supports a maximal of 10 users. 0 means there is no connection
limit.
l Transfer mode: Here you can select the priority between fluency or video quality.
l Network download: System can process the downloaded data first if you enable this
function.
After completing setups click save button and system returns to the previous menu.
5.3.5.1 Advanced Setup
Advanced setup interface is shown as in Figure 5-4. Please draw a circle to enable
corresponding function and then double click current item to go to setup interface.
414H
Figure 5-4
5.3.5.2 IP Filter
IP filter interface is shown as in Figure 5-5. You can add IP in the following list. The list
supports max 64 IP addresses. Please note after you enabled this function, only the IP listed
below can access current DVR. If you disable this function, all IP addresses can access
current DVR.
415H
Figure 5-5
5.3.5.3 Multiple Cast Setup
Multiple-cast setup interface is shown as in Figure 5-6.
416H
53