Download "user manual"

6.2.1 Preset Setup
Note: The following setups are usually operated in Figure
6-, Figure 6-2 and Figure 6-3.
In Figure 6-, use eight direction arrows to adjust camera to
the correct position.
In Figure 6-2, click preset button and input preset number.
The interface is shown as in .
Add this preset to one patrol number
463H
464H
465H
466H
467H
468H
Figure 6-4
6.2.2 Activate Preset
In Figure 6-3 please input preset number in the No. blank, and then click the preset button.
469H
6.2.3 Patrol Setup
In Figure 6-2, click patrol button. The interface is shown in
.
Input preset number and then add this preset to one patrol.
470H
471H
Figure 6-5
6.2.4 Activate Patrol
In Figure 6-3, input patrol number in the No. blank and then click the patrol button
472H
6.2.5 Pattern Setup
In Figure 6-2, click pattern button and then click the begin
button. The interface shows like that in . Please go to
Figure 6- to modify zoom, focus, and iris. Go back to and
click end button. You can memorise all these setups as
pattern 1.
473H
474H
475H
476H
Figure 6-6
6.2.6 Activate Pattern Function
In Figure 6-3 input mode value in the No. blank, and then click pattern button.
477H
74