1
Download CGS User Manual
Transcript
Dok.Nr./Doc. No.: CGS–RIBRE–SUM–0001 Ausgabe/Issue: Überarbtg./Rev.: Seite/Page: 8 – 7–44 Datum/Date: Datum/Date: von /of: 30.01.2009 – 7–183 Mixed Sessions containing nodes with different modes will be displayed. Normal Sessions with session mode ’Normal’ and ’Mixed’ will be displayed. The session mode ’Normal’ implies that the mode of all the TES instances, participating in the test execution, is ’Normal’. Simulation Sessions with session mode ’Simulation’ and ’Mixed’ will be displayed. The session mode ’Simulation’ implies that the mode of all the TES instances, participating in the test execution, is ’Simulation’. The ’Delete Test Session’ window Replay Sessions with session mode ’Replay’ and ’Mixed’ will be displayed. The session mode ’Replay’ implies that the mode of all the TES instances, participating in the test execution, is ’Replay’. 7.2.8.4 The ’Session Status’ Choice The ’Delete Test Session’ window The choice is non–exclusive and determines the status of the test sessions to be listed. Open By selecting the ’Open’ choice, the named sessions which are currently open, will be displayed. TSCV is able to manage up to 5 simultaneously open named sessions (in addition, there will be a default session, which is not displayed in the list). Closed By selecting the ’Closed’ choice, the sessions which are currently closed, will be displayed. The ’Load Replay Session’ window and the ’Assign Replay Session’ window The choice is always dimmed. It is set to ’Closed’ by default, because data can only be replayed for closed test sessions. 7.2.8.5 The ’Specific’ Choice When a session is created in the Test Result DataBase, it will be associated with a CCU via the test configuration representing the current test system set–up. It is possible to restrict the listed sessions to those created for a specific CCU. When the ’Specific’ choice is activated, the dimming of the belonging text fields and button will cease. The database will then return only the sessions associated with the CCU identified in the text fields. 7.2.8.6 The ’Select...’ Button The ’Select...’ button will become active when the session list filter ’Session’s CCU’ is set to ’Specific’. By operating the button, the ’Select CCU’ window is opened and that window may be used to select a CCU to be used as a session list filter. Copyright per DIN 34
