1
Download Software Manual WinIQSIM
Transcript
Generation of IS-95 Signals with WinIQSIM WinIQSIM Window function of basisband filter (Window Function) Data Source Chip rate IS-95 signal Spreding factor; either "64" in Forward Link or "64/6" in Reverse Link 9.2.2 Sequence length in timeslots Basisband filter for pulse shaping (Filter Function) Oversampling factor Sampling Rate Number of samples IS-95 Configuration Panel All parameters of the IS-95 signal (except the definition of the data sources and impairments) can be set via this panel. Fig. 9-11 IS-95 Configuration Panel This panel consists of the Channel Configuration Table which contains channel-specific settings. Two buttons are provided above this table for starting secondary panels, which allow the definition of settings referring to several channels (General Settings) and of parameters for baseband filtering (Filtering). Another two buttons are provided below the table for display of the complementary cumulative distribution function (CDF test) and for on overview of all active channels (Channel Graph). 1013.1642.02 9-6 E-1
