Download CPC805 User Manual v.001 E Pre

Appendices
CPC805
8
Appendices
8.1
Related Standards and Specifications
The Fastwel’s EPIC boards comply with the requirements of the following standards:
Table 8-1:
Related Standards
Type
Standard
Test Parameters
CE: Emission
EN50081-1
–
CE: Immission
EN61000-6-2
–
CE: Electrical safety
EN60950
–
Mechanical dimensions
IEEE 1101.10
–
Vibration (sinusoidal)
IEC60068-2-6-82; Fc
10-50 Hz, amplitude 0.5 mm
5g / 50-500 Hz / 10
(acceleration / frequency range / test cycles per axis)
Permanent shock
IEC60068-2-29-87; Eb
50g / 11 ms / 1000±10 / 1 s
(peak acceleration / shock duration half sine /
number of shocks / recovery time)
Single shock
IEC60068-2-27-87; Ea
100g / 9 ms / 18 / 3 s
(peak acceleration / shock duration / number of shocks /
recovery time in seconds)
Important...
Some versions of the module may have the test results differing from the
ones presented in the above table. For more information please contact
Fastwel’s official representatives.
Information related to this product and its components can be found in the following specifications:
Table 8-2:
Related Specifications
Product
Specification
EPIC Boards
EPIC Specification Revision 1.1 July 2004
http://www.epic-sbc.org
PC/104, PC/104 PCI, and
StackPC Interfaces
PC/104 Specification Revision 2.5, November 2003
PC/104-Plus Specification Revision 2, November 2003
For latest revision of the PC/104 specifications, contact the PC/104 Consortium,
at http://www.pc104.org
PCI Bus
PCI 2.2 Compliant Specifications
For latest revision of the PCI specifications, contact the PCI Special Interest Group
Office at: http://www.pcisig.com
CompactFlash Cards
CF+ and CompactFlash Specification Revision 4.1
CP C8 0 5
Us e r
M a n u a l
52
© 2 0 1 2
F a s t w e l
v . 0 0 1 a
E
P r e