Download User Manual Version 3.2 - 3D-Coat

Transcript
Horizontal. This command puts all selected edges horizontally.
Vertical. This command puts all selected edges vertically.
Set seams. This command marks selected edges as seams.
Del seams. This command unmarks selected seams if there are
such.
Faces Mode. This selection mode differs from Vertices selection mode in four additional commands: Hide, Inv. Hidden,
Unhide, Unhide all. Use this commands to show only selected
faces in the viewport. All other commands work the same
as for Vertices.
Islands Mode. This selection mode lets you operate with separate UV islands. You can translate, rotate and scale (vertically,
horizontally and proportionally) an island with the help of
Manipulator.
Note: that you need to activate the manipulator on the top
bar. Check the Select and Manipulate check-boxes. Also, Keep the
Select check-box always checked unless you don’t want to select
anything.
Unwrapping Methods. These commands are important, as any
mesh you create will need to be unwrapped if you wish to
paint a texture, or do any such work. The are:
ABF (Angle Based Flattening). ABF is a newer one and is used
for better used for organic meshes.
LSCM (Least Squares Conformal Maps). Meshes in 3D-Coat are
unwrapping with LSCM by default. This method is also used
for organic meshes, but unwraps inorganic meshes quite
well too.
Contents
New
Start
Right Side
Panel Paint
Sculpt
Retopo
UV Mode
Planar. This projects across the arbitrary axis, so you may use it
if you need.
Brushes mode. In this mode you operate with the brush which
size and be changed by holding rmb pressed and moving
the mouse aside. With the lmb click and drag you can manipulate the mesh under brush. Use SHIFT+lmb to smooth the
mesh. Use ctrl+lmb to pinch the area under the brush.
Use SHIFT+ctrl+lmb to expand the area under the brush.
Tweak. It lets you drag vertices, edges or faces around in a very
easy way. Simply move the cursor over a vertex/edge/face
until it becomes highlighted and then drag it with lmb.
Checker Options. The mesh can be displayed in one of three
ways: with no checker, with simple checker, with complex
checker.
Multi-UV Support. Another drop-down list on the left of the top
bar is Choose a UV-set list. If the mesh has a multiple UVs you
can switch them in that drop-down list.
Overlapping UVs. You can
have overlapping UVs
within 3D-Coat with no
problems occurring.
Voxels
Render
Menu
Hotkeys
Customize
CUDA
FAQ/Tips
Credits
51 | 94