Download SmartNode Series SmartWare Release 3.20 Software Configuration

Transcript
SmartWare Software Configuration Guide
39 • SIP interface configuration
AOC Over SIP
This enhancement allows sending AOC information transparently from ISDN (or H.323) to SIP and viceversa. AOC-D elements are hex-encoded and sent as application/QSIG content in SIP INFO messages during
a session.
Procedure: aoc-d accept
Mode: context cs / interface sip
Step
1
Command
Purpose
[ name] (if-sip)[interface]#[no] aoc-d accept Enables or disables the reception of SIP Info
messages containing AOC-D elements and
propagate charging information to adjacent
peer.
Procedure: aoc-d emit
Mode: context cs / interface sip
Step
1
Command
[ name] (if-sip)[interface]#[no] aoc-d emit
SIP interface configuration task list
Purpose
Enables or disables the sending of SIP Info
messages with AOC-D elements containing
charging information from adjacent peer. If
no charging information is available, no message is sent.
444