Download Manual - ETS
Transcript
TWR Description: Selects tower mode of operation. Allows the selection of both normal and bore sight towers. In the bore sight mode of operation, the separation distance is taken into account when reporting boom height. This command is intended to allow automated configuration of the EMControl and should not be used by most programs. Devices: Turntables, towers Syntax: TWR <NRM/BOR> NRM : Normal tower BOR : Bore sight tower Response: OK, or an error (error number) Example: Write sdTWR NRM\n : Change device to a normal tower See Also: TT, TYP? ets-lindgren.com EMControl Command Set 69