Download C-DOT DSS MAX-VE - C
Transcript
Chapter 5. Subscriber and System Features 5.1. INTRODUCTION The C-DOT Digital Switching Systems offer a wide range of telephony features and supplementary services. Further capabilities can be developed to meet specific customer needs. Due to mandatory requirement of exchange of messages between the switching systems and user’s equipment, some of the services are exclusively offered to ISDN-subscribers. In case of few of the services offered to PSTN and ISDN subscribers, the implementation of services to PSTN subscribers may be partial and invocation procedure may also differ due to the same reason. 5.2. PSTN (ANALOG) AND ISDN SUBSCRIBER SERVICES The subscriber services provided by C-DOT DSS MAX exchanges for PSTN (Analog) as well as ISDN subscribers are explained as per their logical grouping: 5.2.1. Number Identification Service i. Calling Line Identification Presentation (CLIP) When this service is subscribed by a user as terminating facility, all the incoming calls are offered to the user along with the details of calling party's identity. In exceptional cases, for example if the calling party has subscribed CLIR or due to interworking constraints in the network, it will not be possible to provide caller's identity. ii. Calling Line Identification Restriction (CLIR) This service is offered to the calling party to restrict presentation of it’s number to the called party. When CLIR is subscribed, the originating exchange notifies the destination exchange that the calling party’s number is not allowed to be presented to the called party. The terminating local exchange may indicate to the called user that the calling user identity is unavailable due to restriction. iii. Calling Line Identification Restriction Override (CLIRO) Subscriber with CLIRO as terminating facility instead of CLIP, receives the call with the calling line identification even if the calling 56 C-DOT DSS MAX-VE