Download User Manual COM Express Basic Module MSC C6B-7S

MSC C6B-7S
Rev. 1.8
Feature
Options
User's Manual
Description
Other PCI device ROM
UEFI Oprom
Legacy Oprom
For PCI devices other than Network, Mass storage
or Video defines which Oprom to launch
Boot Option #1…
Device x
Set the system boot order
Note: The number of available Boot options is
dependent on the devices which are connected.
6.1.12 Security
Feature
Options
Description
Administrator Password
Set Password
Set Setup Administrator Password
User Password
Set Password
Set User Password
HDDSecurity
Configuration
Set Password
Set HDD Password
6.1.13 The Save & Exit Menu
The following sections describe each of the options on this menu.
Save Changes and Exit
After making your selections in the setup menus, always select "Exit Saving Changes". This
procedure stores the selections displayed in the menus in a flash. The next time you boot your
computer, the BIOS configures your system according to the setup selections stored in flash.
If you attempt to exit without saving, the program asks if you want to save before exiting. During
boot-up, the Aptio BIOS attempts to load the values saved in flash. If those values cause the
system boot to fail, reboot and press <ESC or DEL> to enter Setup. In Setup, you can get the
Default Values (as described below) or try to change the selections that caused the boot to fail.
Discard Changes and Exit
Exit system setup without saving any changes.
Save Changes and Reset
When you have completed the system configuration changes, select this option to save
the changes and reboot the system, so the new system configuration parameters can take
effect.
72 / 81