Download Surface Control Manager User Manual

Surface Control Manager Program User Manual (ROC800 and FB107)
Field
Description
Block Trip Status
(Before Bypass)
Displays the logic block trip indicator based only on
the block logic operation, before any bypasses are
applied.
Bypasses
Types Currently
Active
Shows the bypasses that are currently active.
Demand Bypass
(Latched)
Activates the manual latched bypass when
selected. This value could be set or removed from
an FST or from an action block.
Remote Bypasses
Allows you to browse other action blocks to be
used to define bypass functionality. When the
remote action block is true, the bypass for this
block is true.
Valid bypass types are:
Latched – Bypassed while the Remote Bypass
block is true.
Class B – Bypassed for the amount of time in the
Class B Timer field once the Remote Bypass block
is true.
Class C - Bypassed until the block clears once the
Remote Bypass block is true.
Class B w/C override - Bypassed for the amount
of time in the Class B Timer field or unless the
Block clears before the timer expires once the
Remote Bypass block is true.
Class B Timer
Seconds – Preset
Class B Timer
Seconds – Elapsed
Sets the timer for Class B bypass.
Shows the elapsed time for Class B bypass.
Class C Deadband
/ Arm Delay –
Deadband EU
Sets the deadband for Class C bypass.
Class C Deadband
/ Arm Delay –
Preset
Sets the timer for Class C bypass.
Class C Deadband
/ Arm Delay –
Elapsed
Shows the elapsed time for Class C bypass.
Block Trip Status
(After Bypass)
Shows the combined status of the logic block and
the bypass block. For example, if the logic block is
true and the bypass is not in effect, then the status
is true. If the logic block is true and the bypass is in
effect, then the status is false.
Chain
To
Issued Sep-14
Allows you to browse a previous action block to
compare results with based on the chain type.
17