Download User Manual for Matrix Maker

Transcript
User Manual for Matrix Maker
Page 7
code(f0 12), e’s make code(24), e’s break code(f0 24), l’s make code(4b), l’s break
code(f0 4b), o’s make code(44) and o’s break code(f0 44).
Note:
1. Please enter the codes in hexadecimal format and use space to separate the
codes.
2. Each code should have at most 2 characters (0-9, A-F or a-f).
3. There are 2 codes you cannot use to assign. They are 00 and 02.
iv.
Layer Index
Depending on the category of the keyboard, it is allowed to program the keyboard at most
16 layers. You can assign a layer index to any key you like.
If, for example, you want to program the keyboard at the 2nd layer, you can choose Layer
2 option in the tool bar. Then assign the key codes by Key Code option, ASCII Code orr
Customize Code option. However, if you do not program a key to the layer index 2, there
will be no response for those keys you assigned at the 2nd layer.