1
Download MELSEC-L Serial Communication Module User`s Manual (Basic)
Transcript
13 DEBUG SUPPORT FUNCTION 13.3.1 Checking with GX Works2 Check the protocol execution logs and protocol execution results in the "Protocol execution log" screen of GX Works2. [Basic operation] 1. Select a module to debug. 1) Display the "Predefined Protocol Support Function" screen. For the method for displaying it, refer to Section 9.1. 2) Display the "Module Selection" screen in the following procedure. "Predefined Protocol Support Function" screen [Debugging Support Function] [Module Selection] 3) Select the I/O address and channel of the module to be debugged, and click the Set button. 4) As the OK button is clicked, the module information is set. 2. Execute the CPRTCL instruction. 3. Display the "Protocol execution log" screen in the following procedure. "Predefined Protocol Support Function" screen [Debugging Support Function] [Protocol Execution Log] 13 - 13 13 - 13
