Download User Manual

8-2
TROUBLESHOOTING
Cartridges do not
Dust or contamination
Remove cartridges from shaft and
collapse fully; cores
build-up in cartridges
manually actuate them while blowing
do not unlock
dust and debris from moving parts.
Replace cartridge if it will not actuate.
Cores slipping on
Cores are too big
See core size tolerance requirements.
cartridges
If cores are within specifications,
contact Maxcess. See back page for
regional telephone numbers.
Excessive rattling in
Cartridge races are worn and
Replace cartridge.
shaft
chrome balls are loose.
Chrome balls are
Cartridge races are worn.
Replace cartridge.
Shaft imbalance
Contact Maxcess. See back page for
falling out of the
cartridge
Excessive shaft
vibration
regional telephone numbers.
Balls or cartridge
Dust or contamination
Remove cartridges from shaft and
races are stuck;
build-up in cartridges
manually actuate them while blowing
parts don’t move
dust and debris from moving parts.
Replace cartridge if it will not actuate.
www.maxcessintl.com
Tidland D490
MI 746508 1 F