Download - Schaeffler Group

Transcript
Services
136
IS 1
Condition Monitoring
The malfunction-free and optimised operation of complex machinery
and plant can normally only be achieved by means of conditionbased maintenance. Schaeffler uses various methods for this task.
Vibration measurements
The measurement of vibrations is a proven method here.
Vibrations reveal damage in machinery at a very early stage.
The vibration expert can assess the condition of the machine without
the need for any dismantling work. A large proportion of possible
causes of damage can thus be detected and assessed with little
work. As a result, damaged components can be replaced as part of
planned downtime.
Depending on the type of machine and its importance for the
production process, condition monitoring can be carried out by
means of either continuous (online) monitoring or regular (offline)
monitoring.
Continuous monitoring
For production-critical machinery, continuous monitoring, Figure 4,
page 137, by means of vibration diagnosis is indispensable in many
cases. Investment in such monitoring systems often pays for itself
after a few months due to the reduced failure costs. Depending on
the area of application, Schaeffler offers a wide range of solutions,
including single channel standalone solutions for smaller
equipment and medium-sized systems with up to 8 channels that
can be extended on a modular basis.
In addition to giving advice on selecting the right system,
Schaeffler also implements monitoring of the machine. This includes
not only hardware selection but also system configuration and,
where necessary, its integration into existing systems.
The customer can decide whether to carry out plant monitoring
himself or to enlist the services of Schaeffler for online monitoring.
Due to the communication options of the monitoring systems,
remote analysis can be carried out by the Schaeffler experts.
Schaeffler Technologies