Download - Schaeffler Group
Transcript
Services 136 IS 1 Condition Monitoring The malfunction-free and optimised operation of complex machinery and plant can normally only be achieved by means of conditionbased maintenance. Schaeffler uses various methods for this task. Vibration measurements The measurement of vibrations is a proven method here. Vibrations reveal damage in machinery at a very early stage. The vibration expert can assess the condition of the machine without the need for any dismantling work. A large proportion of possible causes of damage can thus be detected and assessed with little work. As a result, damaged components can be replaced as part of planned downtime. Depending on the type of machine and its importance for the production process, condition monitoring can be carried out by means of either continuous (online) monitoring or regular (offline) monitoring. Continuous monitoring For production-critical machinery, continuous monitoring, Figure 4, page 137, by means of vibration diagnosis is indispensable in many cases. Investment in such monitoring systems often pays for itself after a few months due to the reduced failure costs. Depending on the area of application, Schaeffler offers a wide range of solutions, including single channel standalone solutions for smaller equipment and medium-sized systems with up to 8 channels that can be extended on a modular basis. In addition to giving advice on selecting the right system, Schaeffler also implements monitoring of the machine. This includes not only hardware selection but also system configuration and, where necessary, its integration into existing systems. The customer can decide whether to carry out plant monitoring himself or to enlist the services of Schaeffler for online monitoring. Due to the communication options of the monitoring systems, remote analysis can be carried out by the Schaeffler experts. Schaeffler Technologies