Download User Manual - Eickemeyer

Chapter 4 – Sterilization
In order to save the setting and to leave the menu, press the KEY
(S).

By again pressing the Key (S), you completely leave the menu and
return to the starting position of the display.
At initial delivery, the Feed water-supply is set to intern.

Prepare items to be sterilized
A significant prerequisite for safe disinfection and sterilization of
→sterilizing materials is the appropriate preparation, i.e. cleaning and
maintenance of the sterilizing materials according to the manufacturer's
instructions. Furthermore the materials, cleaning agents and processing
procedure employed are of significance.
NOTICE:
If possible, sterilize textiles and instruments separately from each other in
separate sterilization containers or sterilization packages.
This way you achieve improved drying results.
Textiles
Observe the following instructions for treating textiles and putting
the textiles into sterilization containers:
■
Danger!
Comply with the instructions of the textile manufacturer for treatment
and sterilization and observe relevant standards and directives.
■ Adjust the folds of the textiles parallel to each other.
■ Stack the textiles in the sterilization containers vertically if possible,
and not too closely together, so that flow channels can form.
■ Retain the vertical stacking method when you pack the textiles in
sterilization containers.
■ If textile packages do not stay together, wrap the textiles in
sterilization paper.
■ Sterilize only dry textiles.
■ The textiles may have no direct contact to ground and walls of the
sterilization chamber, otherwise they absorb →condensate.
In case of non-observance, the steam penetration of the textiles can
be obstructed and/or bad drying results can result. Unsterile textiles
could be the consequence. This could mean endangering the health
of the patient and the practice team.
19