Download User Manual - Eickemeyer

Transcript
Chapter 3 – Initial start-up
Record of installation and setting up
NOTICE:
As documentation of proper setting up, installation and setting up as well
as for your warranty claim, the record of installation must be filled out by
the person responsible and a copy sent to EICKEMEYER.
Switch on autoclave
Switch on mains
After switching on
Turn the mains switch on to power the autoclave (page 10, Fig. 1/(4).

After switching on the autoclave with the mains switch, the →display
shows in alternation to the initial state the message Unlocking
door with button (+), if the door is closed.
Directly after having switched on the autoclave and before initial start-up,
remove the trays and accessories from the chamber.

Press the KEY (+) to unlock the door. After pressing the key you can
open the door
17