Download DML-1200 [v04]

3. Physical installation
X mm
N
Image 3-8
Distance between rigging points
3. Turn in the rigging clamps (A) into the rigging points (screw thread M10). Secure the rigging clamp by turning the safety nut (B)
on the rigging clamp against the rigging point.
Warning: Always use four (4) rigging points, equally spread, to suspend the device.
A
B
Image 3-9
Open rigging clamps
4. Place all four rigging clamps in open position.
5. Place the device under the truss installation and lower the truss until the support bars of the truss are nearby the rigging clamps
mounted on the device.
R59770209 DML-1200 06/11/2009
19