1
Download Troubleshooting - Mid-Island Electrical Supply
Transcript
4-2 Troubleshooting Drive Status The condition or state of your drive is constantly monitored. Any changes will be indicated through the LEDs and/or the HIM (if present). Figure 4.1 Drive Status Indicators PORT MOD NET A NET B ➋ ➊ STS # ➊ ➋ Name Color STS Green (Status) PORT MOD NET A NET B State Flashing Steady Flashing, Drive Stopped Description Drive ready, but not running and no faults are present. Drive running, no faults are present. Yellow A condition exists that is preventing the drive from starting. Check parameters 1403 [Start Inhibits] and/or 1380 [Drive Alarm 1]. Flashing, An intermittent type 1 alarm condition is occurring. Drive Running Check parameter 1380 [Drive Alarm 1]. Refer to Fault Descriptions on page 4-4 and/or Alarm Descriptions on page 4-7. Steady, A continuous type 1 alarm condition exists. Check Drive Running parameter 1380 [Drive Alarm 1]. Refer to Fault Descriptions on page 4-4 and/or Alarm Descriptions on page 4-7. Red Flashing A fault has occurred. Check [Fault x Code] or view the Fault Queue on the HIM. Refer to Fault Descriptions on page 4-4. Steady A non-resettable, non-configurable fault has occurred. Check [Fault x Code] or view the Fault Queue on the HIM. Refer to Fault Descriptions on page 4-4. Refer to the Communication Status of DPI port internal communications (if present). Adapter User Manual. Status of communications module (when installed). Status of network (if connected). Status of secondary network (if connected).
