Download MSQ Plus Mass Detector Getting Started Guide

Transcript
A
Sample Formulations
Sensitivity Test Solutions
b. Using a 10 mL adjustable pipette, add 9.9 mL of 50:50 acetonitrile/water (v/v) to the
vial, and mix the solution.
c. Label the resulting solution 100 pg/μL Erythromycin.
3. Dilute the 100 pg/μL solution of erythromycin 20-fold:
a. Using a 1 mL adjustable pipette, transfer 0.50 mL of the 100 pg/mL erythromycin
solution into a clean, dry 25 mL glass vial.
b. Using a 10 mL adjustable pipette, add 9.5 mL of 50:50 acetonitrile/water (v/v) to the
vial, and mix the solution.
c. Label the resulting solution 5 pg/μL Erythromycin.
Preparing the P-Nitrophenol Sensitivity Test Solution
Use this procedure to prepare the p-nitrophenol sensitivity test solution.
 To prepare 10 mL of the p-nitrophenol sensitivity test solution
1. Allow the 1 mg/mL (1 μg/μL) stock solution of p-nitrophenol to equilibrate to room
temperature. Then, dilute it 100-fold:
a. Using a 200 μL adjustable pipette, transfer 100 μL of the stock solution of
p-nitrophenol into a clean, dry 25 mL glass vial.
b. Using a 10 mL adjustable pipette, add 9.9 mL of 50:50 methanol/water (v/v) to the
vial, and mix the solution.
c. Label the resulting solution 10 ng/μL P-nitrophenol.
2. Dilute the 10 ng/μL solution of p-nitrophenol 100-fold:
a. Using a 200 μL adjustable pipette, transfer 100 μL of the 10 ng/μL solution of
erythromycin into a clean, dry 25 mL glass vial.
b. Using a 10 mL adjustable pipette, add 9.9 mL of 50:50 methanol/water (v/v) to the
vial, and mix the solution.
c. Label the resulting solution 100 pg/μL P-nitrophenol.
3. Dilute the 100 pg/μL solution of p-nitrophenol 50-fold:
a. Using a 200 mL adjustable pipette, transfer 200 μL of the 100 pg/μL p-nitrophenol
solution into a clean, dry 25 mL glass vial.
b. Using a 10 mL adjustable pipette, add 9.8 mL of 50:50 methanol/water (v/v) to the
vial, and mix the solution.
c. Label the resulting solution 2 pg/μL P-nitrophenol.
104
MSQ Plus Mass Detector Getting Started Guide
Thermo Scientific