Download RoverBase User`s Guide

Transcript
RoverBase Wireless
5
Program Installation
13
Program Installation
There are several programs on the RoverBase CD that must be installed on one or more PCs
before you can start using RoverBase. The programs that must or may need to be installed
include:
Parts Setup Utility. This program must be installed.
Measurement Export Utility. This program must be installed.
USB Drivers. These drivers are only required if you are using the 6' serial to USB
interface cable. If you are connecting the Docking Station into a 9-pin serial port on your
PC, these USB drivers are not required.
The Parts Setup and Measurement Export Utilities are separate programs. The installation at
your facility may use a different PCs for RoverBase setup and measurement export. If you do
use different PCs, you will need a Docking Station for each PC. You can install any of the
programs on the CD on as may computers as you require.
To install the programs, insert the CD and following the installation instructions. You must
have administrative rights to do the installation.
Copyright © 2012 MicroRidge Systems, Inc.