1
Download CubeSuite Ver.1.40 Integrated Development Environment User`s
Transcript
CubeSuite Ver.1.40 APPENDIX B COMMAND REFERENCE Xlink_output option (if ROMization is performed) or the -Xno_romize option (if ROMization is not performed) at the same time. - This option can not be specified together with the -Xrelinkable_object option. An operation fault will occur if the load module file that has been generated using the -Xrelinkable_object option is input. [Example of use] - To generate load module file for the boot area "boot.lmf" with 0x200 as the start address of the branch table, describe as: >cx -CF3746 -Xflash_ext_table=0x200 -Xlink_output=boot.lmf boot.c R20UT0261EJ0100 Rev.1.00 Oct 01, 2010 Page 388 of 577
