Download Z8 encore! 64K Series MCU Development Kit User Manual, UM0151

Z8F64200100KIT
Z8 Encore!® 64K Series MCU
Development Kit
User Manual
Preliminary
UM015103-1203
ZiLOG Worldwide Headquarters • 532 Race Street • San Jose, CA 95126-3432
Telephone: 408.558.8500 • Fax: 408.558.8300 • www.ZiLOG.com
Z8 Encore!® 64K Series MCU
Development Kit User Manual
ii
This publication is subject to replacement by a later edition. To determine whether a later
edition exists, or to request copies of publications, contact:
ZiLOG Worldwide Headquarters
532 Race Street
San Jose, CA 95126-3432
Telephone: 408.558.8500
Fax: 408.558.8300
www.ZiLOG.com
Document Disclaimer
ZiLOG is a registered trademark of ZiLOG Inc. in the United States and in other countries. All other products
and/or service names mentioned herein may be trademarks of the companies with which they are associated.
©2003 by ZiLOG, Inc. All rights reserved. Information in this publication concerning the devices,
applications, or technology described is intended to suggest possible uses and may be superseded. ZiLOG,
INC. DOES NOT ASSUME LIABILITY FOR OR PROVIDE A REPRESENTATION OF ACCURACY OF
THE INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED IN THIS DOCUMENT. ZiLOG
ALSO DOES NOT ASSUME LIABILITY FOR INTELLECTUAL PROPERTY INFRINGEMENT
RELATED IN ANY MANNER TO USE OF INFORMATION, DEVICES, OR TECHNOLOGY
DESCRIBED HEREIN OR OTHERWISE. Except with the express written approval of ZiLOG, use of
information, devices, or technology as critical components of life support systems is not authorized. No
licenses are conveyed, implicitly or otherwise, by this document under any intellectual property rights.
Disclaimer
Preliminary
UM015103-1203
Z8 Encore!® 64K Series MCU
Development Kit User Manual
iii
Safeguards
The following precautions must be observed when working with the
devices described in this document.
Caution: Always use a grounding strap to prevent damage resulting from electrostatic discharge (ESD).
Disclaimer
Preliminary
UM015103-1203
Z8 Encore!® 64K Series MCU
Development Kit User Manual
iv
Table of Contents
Safeguards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
List of Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v
List of Tables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Software (on CD-ROM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
System/Software Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Supported Host System Configuration . . . . . . . . . . . . . . . . . . . . . . . .3
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Z8 Encore! 64K Series MCU Development Board . . . . . . . . . . . . . . . . . . .6
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
MCU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
IrDA Transceiver with Endec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Power and Communication Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . .9
External Interface Connectors JP1 and JP2 . . . . . . . . . . . . . . . . . . . . . . .9
Schematics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Disclaimer
Preliminary
UM015103-1203
Z8 Encore!® 64K Series MCU
Development Kit User Manual
v
List of Figures
Figure 1.
Figure 2.
Z8 Encore! 64K Series MCU Development Kit Contents . .2
Z8 Encore!® 64K Series MCU Development Board . . . . . .6
List of Tables
Table 1.
Disclaimer
Jumpers JP3 and JP4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Preliminary
UM015103-1203
Z8 Encore!® 64K Series MCU
Development Kit User Manual
1
Introduction
The Z8 Encore!® 64K Series MCU is part of the line of ZiLOG microcontroller products.
The Z8 Encore! MCU Development Kit (Z8F64200100KIT) allows users
to become familiar with the hardware and software tools available with
this product. This kit consists of the 64KB version of the Z8 Encore!
Development board that supports and presents the features of the Z8
Encore! 64K Series of microcontrollers. The software development tool
kit allows users to begin writing application software and contains all supporting documents.
This manual acquaints users with the Z8 Encore! 64K Series MCU Development Kit, and gives instructions on setting up and using the tools to
start building designs and applications.
Kit Contents
The Z8 Encore!® 64K Series MCU Development Kit contains the following:
Hardware
Introduction
•
•
Z8 Encore!® Z8F642 Development board
•
5VDC power supply
Smart cable for PC to Z8 Encore! Z8F642 Development board (DB9
to six-pin male)
Preliminary
UM015103-1203
Z8 Encore!® 64K Series MCU
Development Kit User Manual
2
Packaging
CD-ROM Containing
Documentation
Power
Supply
Smart Cable
Development
Board
Figure 1. Z8 Encore! 64K Series MCU Development Kit Contents
Software (on CD-ROM)
•
•
•
•
ZDS II- Z8 Encore! IDE with ANSI C-Compiler
Sample code
Document browser
Acrobat Reader install program
Documentation
•
•
Introduction
Quick Start Guide
Registration card
Preliminary
UM015103-1203
Z8 Encore!® 64K Series MCU
Development Kit User Manual
3
•
Z8 Encore!TM 64K Series MCU technical documentation (on CDROM)
– Development Kit User Manual
– ZDS II - IDE User Manual
– eZ8 CPU User Manual
– Product Specification
– Product briefs
– Application notes
– Programmer’s Reference Sheet
The sample code is installed with ZDS II and resides in the <installation directory>\samples in the user's disk drive.
The documentation can be installed by the user with the DemoShield
interface or can be viewed on the CD-ROM using the DemoShield menus
and a PDF reader. A copy of the Acrobat installer is provided on the CDROM and can be installed from the DemoShield install screen. After
installing the documentation on the user’s system Windows Explorer can
be used to select any document to be viewed with your favorite PDF file
viewer.
System/Software Requirements
IBM PC (or compatible computer) with the following minimum configurations:
Supported Host System Configuration
Introduction
•
Win98 Second Edition, WinNT 4.0 Service Pack 6, Win2000 Service
Pack 3, WinXP Service Pack 1
•
•
•
PentiumII/233MHz processor or higher up to Pentium IV, 2.8 GHz
96MB RAM or more
25MB hard disk space or more
Preliminary
UM015103-1203
Z8 Encore!® 64K Series MCU
Development Kit User Manual
4
•
•
•
Introduction
Super VGA video adapter
CD-ROM
One or more RS-232 communication ports
Preliminary
UM015103-1203
Z8 Encore!® 64K Series MCU
Development Kit User Manual
5
Installation
Follow the directions in the Z8 Encore!® Development Kits Quick Start
Guide (QS0028) to for software installation and setup of the Z8 Encore!
64K Series MCU Development kit.
Installation
Preliminary
UM015103-1203
Z8 Encore!® 64K Series MCU
Development Kit User Manual
6
Z8 Encore! 64K Series MCU Development Board
Introduction
The Z8 Encore! 64K Series MCU development board is a development
and prototyping board for the Z8 Encore! 64K series microcontrollers.
The board provides customers with a tool to evaluate features of Z8
Encore! 64K series MCUs, and to start developing an application before
building the hardware.
TEST
U4
RESET
Y1
LEDs
JP1
P2
J2
P1 Console
J1
JP2
Figure 14. Z8 Encore!® 64K Series MCU Development Board
Z8 Encore! 64K Series MCU Development BoardPreliminary
UM015103-1203
Z8 Encore!® 64K Series MCU
Development Kit User Manual
7
Features
•
•
•
•
•
•
•
•
•
•
•
Z8 Encore!® MCU
3 LEDs
RS-232 interface (P1)
IrDA transceiver (U4)
Two pushbuttons, RESET and TEST
5VDC power connector (J1)
On-Chip Debugger interface (P2)
Crystal Oscillator (Y1)
Header for ADC input (J2)
Prototyping area
External interface connectors JP1 and JP2 (not populated)
MCU
The Z8 Encore!® Z8F642 MCU is member of a family of ZiLOG microcontroller products based upon the 8-bit eZ8 core CPU. The Flash in-circuit programming capability allows for faster development time and
program changes in the field. The eZ8 core CPU is upward compatible
with existing Z8® instructions. The rich peripheral set of the Z8 Encore!
Z8F642 makes it suitable for a variety of applications including motor
control, security systems, home appliances, personal electronic devices,
and sensors.
The evaluation board contains circuitry to support and present all the features of the Z8 Encore! Z8F642. The main features of the Z8 Encore!
Z8F642 are:
•
eZ8 core CPU
Z8 Encore! 64K Series MCU Development BoardPreliminary
UM015103-1203
Z8 Encore!® 64K Series MCU
Development Kit User Manual
8
•
•
•
64K of Flash memory with in-circuit programming capability
•
•
•
•
•
Two Full-duplex UART
•
•
•
•
•
•
•
•
Watch-Dog Timer (WDT) with internal RC oscillator
4K of register RAM
Either eight or twelve channels, 10-bit analog-to-digital converter
(ADC)
I2C interface (Master Mode only)
Serial Peripheral Interface (SPI)
Infrared Data Association (IrDA)-compliant infrared encoder/decoder
Three or four 16-bit timers with capture, compare, and PWM
capability
Thirty one, forty six or sixty I/O pins
Programmable priority interrupts
On-Chip Debugger
Voltage Brown-out Protection (VBO)
Power-On Reset (POR)
2.7–3.6V operating voltage with 5V-tolerant inputs
Operating temperature: 20° ± 10°C
For further information on the Z8 Encore!TM family of devices, consult the
product specification, PS0199 (Flash) or PS0204 (ROM), available for
download from www.zilog.com.
IrDA Transceiver with Endec
The Z8 Encore! Z8F642 contains a fully-functional, high-performance
UART with Infrared Encoder/Decoder (Endec). The Infrared Endec is
integrated with an on-chip UART to allow easy communication between
Z8 Encore! 64K Series MCU Development BoardPreliminary
UM015103-1203
Z8 Encore!® 64K Series MCU
Development Kit User Manual
9
the Z8 Encore! Z8F642 and IrDA transceivers. Infrared communication
provides secure, reliable, low-cost, point-to-point communication
between PCs, PDAs, cell phones, printers and other infrared enabled
devices.
Power and Communication Interfaces
Table 1 provides jumper information concerning the shunt status, functions and devices affected of selected jumpers.
Table 1. Jumpers JP3 and JP4
Jumper
Status
Device
Affected
JP3
OUT*
IrDA interface Enable
JP3
IN
IrDA interface Disable
X
JP4**
OUT*
RS-232
Enable
X
JP4
IN
RS-232
Disable
Status
Default
Note: * These jumpers must not be OUT at the same time
Note: ** If the module is plugged onto an eZ80 Development platform or eZ80
demonstration board the local RS-232 can be disabled by connecting header JP2
pin 50 to the corresponding GND on the mating connector
External Interface Connectors JP1 and JP2
The external interface connectors are not populated when the board is
shipped. The user can populate them with 0.1" space headers of choice.
Note: Only Power and GND nets on connector JP1 are used on this module.
Z8 Encore! 64K Series MCU Development BoardPreliminary
UM015103-1203
Z8 Encore!® 64K Series MCU
Development Kit User Manual
10
Schematics
This section includes schematics for the the Z8 Encore! 64K Series MCU
Development Board.
Schematics
Preliminary
UM015103-1203
Z8 Encore! ® 64K Series MCU
Development Kit User Manual
11
VCC_33V
J1
2
3
1
F1
VCC_5V
U1
+ C2
C4
0.1uF
C3
0.1uF
100/10
U2
D
3
1
VIN VOUT
GND
VCC_33V
2
C7
0.1uF
VCC_33V
R1
LT1086-3.3/TO220
PA5_TXD0
+ C8
C9
PA5_TXD0
GND
680
C1
0.1uF
19
VCC_5V
RXE110
2
C1+
4
C1-
5
C2+
6
C2-
13
T1IN
T1OUT
17
12
T2IN
T2OUT
8
15
R1OUT
R1IN
16
10
R2OUT
R2IN
9
VCC
5V
PWR JACK
V+
GND
3
CONSOLE
P1
C5
0.1uF
V-
C6
0.1uF
1
6
2
7
3
8
4
9
5
TXD0
CTS0
RXD0
7
100/10
3.3 OK
PA4_RXD0
1
1
20
GND
EN
SHDN
MAX3222
NC
NC
DB9 Female
USER
14
11
VCC_33V
GND
R2
10K
VCC_33V
R16
10K
2
R17
10K
7
JP4
1
2
74LVC04/SO_1
R18
10K
U3C
14
1
5
6
R19
10K
U3D
9
8
11
U3E
14
-DIS_232
U3A
14
14
C
14
10
13
U3F
12
GND
7
7
74LVC04/SO_1
7
74LVC04/SO_1
74LVC04/SO_1
7
LED
PA4_RXD0
GND
D1
PA3_CTS0
18
PA3_CTS0
2
0.1uF
74LVC04/SO_1
DIS RS232
R3
D2
2
R4
R5
D3
1
PA1_T0OUT
R6
VCC_33V
2
68
GND
U4
TEST
R8
10K
R9
D4
1
330nF
R7
2R7
100K
PA2
SW1
100
YELL
100
GREEN
3
-DIS_IRDA
R10
4
VCC
1
LEDA
PA5_TXD0
2
TXD
IRDA_SD
4
SD
PA4_RXD0
3
RXD
6
GND
U3B
2
5
7
JP3
1
2
PC0_T1IN
74LVC04/SO_1
ZHX1810
0
GND
100
T
B
C10
VCC_33V
100
RED
14
1
PA0_T0IN
DIS IRDA
GND
R11 10K
1
2
3
4
5
A
1
2
3
4
5
VCC_33V
P2
VCC_33V
TP1
GND
TP2
GND
1
3
5
DBG
INTERFACE
2
4
6
DBG
DBG
Title
Encore! F642. Evaluation Module. Schematic.
Header 3x2
Size
B
Document Number
Rev
96C0918-001
A
Schematic, Z8 Encore!® 64K Series MCU Development Board, Page 1 of 2
Appendix
Preliminary
UM015103-1203
Z8 Encore! ® 64K Series MCU
Development Kit User Manual
12
connector 2
PA1_T0OUT
IO
AVDD
3
JP2
C12
C13
0.1uF
AGND
PA0_T0IN
PA0_T0IN
PD2
PC2_SS
PF6
-RESET
SW2
1
C15
0.001uF
0.1uF
PF7
PF6
C19
0.001uF
Header 1
JP6
C16
C20
0.1uF
PF5
1
Header 1
JP7
1
VCC_33V
PF5
PF4
PF3
PE4
PE3
GND
PE2
PE1
PE0
GND
PF2
PF1
PF0
VCC_33V
PD1_T3OUT
PD0_T3IN
XOUT
XIN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
PA0/T0IN
PD2
PC2/SS
PF6
RESET
VDD
PF5
PF4
PF3
PE4
PE3
GND
PE2
PE1
PE0
GND
PF2
PF1
PF0
VDD
PD1/T3OUT
PD0/T3IN
XOUT
XIN
R12
220
PF4
PF3
18.432MHz
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
1
Header 1
JP10
1
DBG
PA5_TXD0
PA3_CTS0
PA4_RXD0
R13 100K
C23
18pF
PF2
PG1
PG2
C17
0.1uF
C18
0.001uF
PG3
PG4
C21
0.1uF
C22
0.001uF
PG5
18pF
C24
PG6
PG7
PF1
PH1_ANA9
PB0_ANA0
PB1_ANA1
PB4_ANA4
C27
0.001uF
C28
0.001uF
C29
0.001uF
PA6_SCL
PA7_SDA
Header 1
JP16
1
-RESET
VCC_33V
Header 1
JP17
VCC_33V
1
PB5_ANA5
PB6_ANA6
PB7_ANA7
PB3_ANA3
PB2_ANA2
PH2_ANA10 PH3_ANA11
C30
0.001uF
C31
0.001uF
C32
0.001uF
C33
0.001uF
C34
0.001uF
C35
0.001uF
C36
0.001uF
C37
0.001uF
C25
22uF
26
24
22
20
18
16
14
12
10
8
6
4
2
NC
NC
NC
PE6
PE4
PE2
PE0
GND
PC5_MISO
PC6_T2IN
PC2_SS
PA0_T0IN
PA1_T0OUT
PA2
PD6_CTS1
PD4_RXD1
PD0_T3IN
GND
PD2
PG0
PA5_TXD0
NC
NC
NC
NC
GND
-DIS_232
-DIS_IRDA
-DIS_IrDA
NC
GND
NC
NC
If Module is plugged onto the Dev Platform the local
RS232 interface is disabled by pin 50 of JP2
Header 1
JP19
1
Header 1
JP20
JP1
1
Header 1
JP21
1
C38
0.01uF
J2
25
23
21
19
17
15
13
11
9
7
5
3
1
NC
NC
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
HEADER 30x2/SM
1
AGND
PH0_ANA8
PH1_ANA9
PB0_ANA0
PB1_ANA1
PB4_ANA4
PB5_ANA5
PB6_ANA6
PB7_ANA7
PB3_ANA3
PB2_ANA2
PH2_ANA10
PH3_ANA11
VREF
NC
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
Header 1
JP18
connector 1
for
reference
only
+
C26
0.001uF
GND
1
Header 1
Header 1
PH0_ANA8
JP15
Z8F642
VREF
1
PA7_SDA
PD6_CTS1
PC3_SCK
PD7_RCOUT
PG0
GND
PG1
PG2
PE5
PE6
PE7
VCC_33V
PG3
PG4
PG5
PG6
VCC_33V
PG7
PC7_T2OUT
PC6_T2IN
DBG
PC1_T1OUT
PC0_T1IN
GND
GND
AVDD
PH0_ANA8
PH1_ANA9
PB0_ANA0
PB1_ANA1
PB4_ANA4
PB5_ANA5
PB6_ANA6
PB7_ANA7
PB3_ANA3
PB2_ANA2
PH2_ANA10
PH3_ANA11
VREF
AGND
Header 1
JP9
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
PC0_T1IN
Y1
Header 1
JP8
PA7/SDA
PD6/CTS1
PC3/SCK
PD7/RCOUT
PG0
GND
PG1
PG2
PE5
PE6
PE7
VDD
PG3
PG4
PG5
PG6
VDD
PG7
PC7/T2OUT
PC6/T2IN
DBG
PC1/T1OUT
PC0/T1IN
GND
GND
AVDD
PH0/ALG8
PH1/ALG9
PB0/ALG0
PB1/ALG1
PB4/ALG4
PB5/ALG5
PB6/ALG6
PB7/ALG7
PB3/ALG3
PB2/ALG2
PH2/ALG10
PH3/ALG11
VREF
AGND
1
Header 1
JP14
DBG
PA5_TXD0
PA3_CTS0
PA4_RXD0
PA1/T0OUT
PA2
PA3/CTS0
GND
VDD
PF7
PC5/MISO
PD3
PD4/RXD1
PD5/TXD1
PC4/MOSI
VDD
GND
PA4/RXD0
PA5/TXD0
PA6/SCL
GND
RESET
JP13
0.1uF
EMI Filter
U6
GND
PE7
PE5
PE3
PE1
VCC_33V
PC4_MOSI
PC7_T2OUT
PC3_SCK
PC0_T1IN
GND
PC1_T1OUT
PD1_T3OUT
PD3
PD5_TXD1
PD7_RCOUT
PF0
PA3_CTS0
PA4_RXD0
C14
0.001uF
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
IO
2
VCC_33V
GND
VCC_33V 1
C11
0.001uF
PA1_T0OUT
PA2
PA3_CTS0
GND
VCC_33V
PF7
PC5_MISO
PD3
PD4_RXD1
PD5_TXD1
PC4_MOSI
VCC_33V
GND
PA4_RXD0
PA5_TXD0
PA6_SCL
L1
1
3
-TRSTN
5
-F91_WE 7
GND
9
A6
11
A10
13
GND
15
A8
17
A13
19
A15
21
A18
23
A19
25
A2
27
A11
29
A4
31
A5
33
35
A21
37
A22
39
-CS0
41
-CS2
43
D1
45
D3
47
D5
49
D7
51
-MREQ 53
GND
55
-WR
57
-BUSACK 59
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
VCC_33V
VCC_33V
A0
A3
VCC_33V
A7
A9
A14
A16
GND
A1
A12
A20
A17
-DIS_FLASH
VCC_33V
A23
-CS1
D0
D2
D4
GND
D6
-IOREQ
-RD
-INSTRD
-BUSREQ
HEADER 30x2/SM
Title
Encore! F642. Evaluation Module. Schematic.
Size
B
Date:
Document Number
Rev
96C0918-001
Friday, June 06, 2003
A
Sheet
2
of
2
Schematic, Z8 Encore!® 64K Series MCU Development Board Page 2 of 2
Appendix
Preliminary
UM015103-1203