Download Quanser Engineering Trainer for NI

QNET User Manual
ID #
1
2
3
4
5
Description
DC motor
High-resolution encoder
Motor metal chamber
Inertial load
PCI connector to NI ELVIS: for interfacing
QNET module with DAC
ID #
6
7
8
9
Description
QNET PWM/Encoder board
24V QNET power jack
Fuse
+B, +15V, -15V, +5V LEDs
Table 8: DCMCT component nomenclature.
4.2. System Schematic
A schematic of the DCMCT system interfaced with a DAQ device is provided in Figure 17.
Figure 17: Schematic of QNET-DCMCT system.
4.3. Component Description
This section provides a description of the individual elements comprising the full DCMCT system.
Document Number 850 ♦ Revision 1.11 ♦ Page 16