1
Download XtraWare Users Manual
Transcript
1 2 Pn2D4 Oscillation Canceling Mode Switch 1Pn2C6 Communication switch 3 Pn408 Torque Control Function Switches Name Error Counter Clear Signal Form Clear Operation Filter Selection 0 Check Sum 1 Communication definitions 2 Not Used Default Setting Description 8 A phase + B phase (x2), negative logic 9 A phase + B phase (x4), negative logic 0 Clears error counter when the signal goes high 1 Clears error counter at the rising edge of the signal 2 Clears error counter when the signal goes low 3 Clears error counter at the falling edge of the signal 0 Clears error counter at the base block 1 Does not clear error counter (Possible to clear error counter only with CLR signal). 2 Clears error counter when an alarm occurs 3 Clear signal ignore 0 Reference input filter for line driver signals 1 Reference input filter for open collector signals 0 Does not use check sum 1 Uses check sum 0 Default comm.. setting (1 start, 7 data, Even-parity) 0 0 0 1 0 3 1 Normally open 2 Home failure 0 0 Oscillation Canceling Mode 0 OCA is not activated 1 OCA is active 1 Not used - - Notch filter selection 0 1 Disabled Uses a notch filter for torque reference 2 3 0 224 Setting Parameter Digit Place Parameter Reference 0 XtraWare User Manual
