Download Installation Operation Maintenance Technical Instructions
Transcript
PIX 17 End of the equipment service life (contd.) 17.4 Specific provisions concerning the circuit-breaker Collect the SF6 gas using a collecting unit. ■■ Dismantle the shut-off poles in a specific room using the specific tool and applying the mandatory precautions. ■■ Clean the parts before disposal. ■■ On disassembly, the materials must be sorted and routed to the material-specific recycling facilities. 17.5 Dividing up and recycling of the materials used for PIX (see § 17.1) Total weight: switchgear panel + circuit-breaker + MiCOM relay = 810 Kg Materials including inserts Steel Stainless steel (Fr.: IPOX?) Weight (kg) 568,23 105,4 Aluminium and aluminium alloys 2,34 Total metal content (whereof inserts) Material Epoxy resin* (except transformers) 83,83 Weight (kg) % of Materials 51 Material Recycling 39,3 PUR resin in transformers Total thermoset content Yes (95%) 678,97 3 Others Yes (100%) 0 Epoxy resin in transformers Glass fibre reinforced polyester Recycling 3 Copper and copper-based alloys Other non-ferrous metals % of Materials Not recyclable (routed to technical disposal plants) 16,7 0 110 13,58 Weight (kg) % of Materials PC 2,45 PTFE 0,08 Recycling PVC 0 PBT 10,6 PA 1,92 Others (PMMA, PE, PET) 0,13 Total thermoset content 15,18 1,88 Material Weight (kg) % of Materials Elastomers 0,16 0,02 Paint 0,2 0,02 Glass 4,14 0,51 Weight (kg) % of Materials Recycling 0,55 0,07 Yes (100%) (Recycling by regeneration) Weight (kg) % of Materials Recycling 0,8 0,09 Not recyclable Material SF6 Other materials Total others AMTNoT056-02 Not recyclable Recycling Not recyclable 69