Download My Document - crsllc

This product is licensed by The United States. Diversion contrary to U.S. law is prohibited. Export or re-export
of this product outside of The United States may require authorization by the U.S. Bureau of Industry and
Security. Please contact FreeWave Technologies, Inc. for assistance and further information.
UL Notifications
Models FGRO9-CSU, FGRO9-TSU, and FGRSR-CSU are suitable for use in Class 1, Division 2, Groups A, B, C,
and D or non-hazardous locations only. Do not connect or disconnect any connectors while the circuit is live unless
the area is known to be non-hazardous.
Note: Models FGRO9-CA, FGRSR-TSU, FGR-115RC, and FGR-115WC are not UL approved.
Warning! EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY IMPAIR
SUITABILITY FOR CLASS 1, DIVISION 2.
Warning! DO NOT REMOVE OR INSERT THE DIAGNOSTICS CABLE WHILE THE
CIRCUIT IS LIVE UNLESS THE AREA IS KNOWN TO BE FREE OF IGNITION
CONCENTRATIONS OR FLAMMABLE GASES AND VAPORS.
Input voltage for models FGRO-9CA, FGRO9-CSU, FGRO9-TSU, FGR-115RC, and FGR-115WC is +6.5 to +30
VDC. Input voltage for models FGRSR-CSU and FGRSR-TSU is +6.0 to +20.0 VDC.
Important: Input power shall be derived from a single Class 2 power source.
LUM0047AA Rev B
iii